How to use it
User instructions and warranty
The Handicheck™ device has been manufactured in the UK to the highest standards of manufacture and thoroughly checked to ensure it is in perfect condition. Follow the instructions and the Handicheck™ will give you trouble free operation.
The no touch sensor system, liquid handwash dispenser, and disclosing/checking system is an integrated sink side unit with easy fill soap reservoir allowing wash check and go, as clean hands are safe hands. It gives you the peace of mind that effective handwashing has taken place in training and everyday situations.
Warning: never look directly at the UV light.
SHAKE SOAP WELL BEFORE USE
The Handicheck™ box describes how to operate the device.
Operation Instructions
To prepare device:
- When device received, fully charge using USB-C cable (standard charging cable – not provided).
- Recharge low voltage battery when device first used and/or when red light in the light loop comes on.
- Use only USB-C cable when recharging.
- After charging completely disconnect USB cable.
- When not in use turn unit off by sliding On/Off switch to the right.
- Use only Handisoap™ with this Handicheck™. SHAKE WELL BEFORE USE. Open soap refill stopper at base of the light loop. Pour Handisoap™ from bottle into reservoir. Do not overfill. Replace stopper.
To use
- Switch on unit by moving switch towards ‘I’ mark on the casing.
- Wait for a few seconds to allow controls to load and for the unit to boot up.
- With dry hands place one hand under the soap dispense point on the side.
- Hold hand in place under the nozzle whilst the exact dosage of soap is dispensed.
- Spread Handisoap™ evenly over back and front of both hands. This is the control step to ensure the UV tracer/soap is covering all areas of the hand. This is the starting point of the hand check/training/washing visualisation step.
- Wash hands with warm water.
- Return hands one at a time into the light loop to inspect.
- If any fluoresces remains, this indicates washing is insufficient in these areas.
- Return to sink and wash hands again until there is no sign of fluorescence left.
- See video via the QR code or at Handicheck.co.uk
- At end of use, turn device off by sliding switch to ‘0’ on the casing.
Starting point
5 second hand wash
10 second hand wash
20 second hand wash
To store
- When not in use on a daily basis, empty Handisoap™ and flush Handicheck™ through using water until dispense point runs clear.
- This prevents soap drying out in the device and maintains the life of the unit for best results every time.
- Store in the box.
- Carry in Handicheck™ Tote bag for easy carry dynamics.
- The easy clean purpose built all in one box and bag is in development by request from valued customers.
- Store Handisoap™ in cool dry place.
Both Handicheck™ & Handisoap™ are protected by UK patents.
Warranty
The Handicheck™ comes with a 12-month warranty. This high-quality device has been manufactured and assembled with care to the most exacting specification. Any faults due to material or manufacturing defects will be rectified or parts replaced without charge for a period of 12 months from purchase.
In case of complaint, please contact The Hannlie Company Limited directly at sales@hannlie.com
Please include model number, serial number, name and address in the contact mail.